In larger systems, which use a Sequence or AV8 to control racks of electronics, it is often necessary to power products remotely, such as active speakers, subs, screens or projectors, and it may be difficult to bring their power cables back to the control rack.
The Slave One is a small, single channel slave unit, up to four of which can be controlled by the low voltage slave output on a Sequence or AV8. This increases the number of sequentially controlled channels from eight up to twelve. Each Slave One has a small dip switch that can assign it to a specific channel.
The advantages of this approach are:
The "Slave Input" is a 5 pin XLR chassis socket and a loop through "Slave out" is provided to daisy-chain to other units.
| Dimensions: | 85 x 60 x 125mm (W x H x D) 3U rack | |
| Product Weight: |
0.5Kg | |
| Nominal Input Voltage: | 230VAC (European version) | |
| Input Frequency: | 48 - 62 Hz | |
| Number of Outputs: | 1 | |
| Input Socket: | Neutrik 20A PowerCon (Blue inlet) | |
| Output Socket: | Neutrik 20A PowerCon (Grey outlet) | |
| Maximum Continuous Current: | 20 Amps | |
| Slave Input connector: | Neutrik 5 pin XLR male | |
| Slave Input Specification: | Trigger 12VDC @ 75mA | |
| Slave Ouput Connector: | Neutrik 5 pin XLR female |
© 2008 ISOL-8 Teknologies Ltd. Tel: 020 8856 8856
